Stormsure is a true all-rounder: It is suitable for waterproof repair of
-Fabrics made of natural and synthetic fibers,
-Rubber and Hypalon,
-Leather,
-Nylon,
-PVC and PU (polyurethane) and almost all other plastics (including GRP).
It seals holes and cracks reliably and quickly. It creates a stronger bond on most materials than the material itself, making it particularly suitable for elastic surfaces such as neoprene, rubber, PVC, etc.
Due to its consistency, Stormsure not only bonds the damaged parts but also fills larger holes without the need for additional patches.
You may have already heard of
"The Experiment - Stormsure" .
The goal was to put this very special adhesive through its paces. We even cut intact inflatable boats in half and had customers repair them using Stormsure. The results are astonishing!
Stormsure not only permanently bonded the boats together, making them fit for tough use again, but also sealed porous and leaky areas WITHOUT the need for a patch!
Special features
- Stormsure hardens through the moisture contained in the ambient air!
- Stormsure remains flexible after curing!
- Stormsure is pressure, tensile and tear resistant despite its elasticity
These properties make Stormsure a virtually unique adhesive and therefore an irreplaceable repair aid for the home, workshop, work and all hobbies!
Examples for anglers :
- permanently seal defective waders / waders with pure Stormsure without additional patches
- permanently seal defective waterproof clothing with pure Stormsure without additional patches
- Depending on the size of the holes, inflatable boats can be permanently repaired with pure Stormsure or Stormsure + patches
- Defective tents, unhooking mats, bags, rod pods and landing nets are repaired "patchless" (without patches) with pure Stormsure in no time and thus made usable again
- the properties of Stormsure create completely new possibilities in the end tackle area
Read also: iBlog Update:
Experiment Stormsure – THE FINALE Part 1 See also: Video 1:
The Stormsure Experiment - We Need Boats to Repair! Video 2:
The Stormsure Experiment - Repairing a Split Inflatable Boat Due to its sensational success, Stormsure is now available at our Imperial Fishing Layout at the best prices!
Stormsure sticks almost anything! Stormsure Glue is used by professional saddlers and repair companies! The glue hardens upon contact with water/humidity – the best glue for us anglers!
In this video you can see a brief overview of various repair options with Stormsure
Video length: 2:56 min "Patchless repair" - Instructions for repairing with Stormsure without additional patches
Video length: 3:34 min "Patchless repair" - Instructions for repairing with Stormsure without additional patches
Video length: 1:12 min Use for: Repairs, connections, sealing and technical applications!
Adhesive materials: PVC, metals, glass, plastic, PU, composites, nylon, rubber, leather, wood, many fabrics, artificial materials & more -
all combinable with each other! Characteristics: • High abrasion resistance - ideal for bonding and coating
• For faster curing, mix with 1% water or special thinner
• Exceptional flexibility even in cold conditions
• Can be used with a special thinner (60:40) to coat porous materials.
• Resistance to many chemicals
STORMSURE Instructions for Use: Note: Check the repaired areas before use. Follow the instructions exactly.
Application: Clean the damaged area with soapy water to remove dirt and
Dust. Then clean the area thoroughly with a chemical cleaner (such as acetone, nail polish remover
or spirit). Stormsure is applied directly to the damaged area on one side and approximately 5 mm beyond this area. Ensure that the bonding area is smooth. Stormsure will dry after 2 to 4 hours, but complete drying is only achieved after 10 to 12 hours.
To accelerate curing, mix a very small amount of water or adhesive hardener with Stormsure in a small container. This must be done very thoroughly by stirring vigorously (e.g., with a brush).
Sealing holes with pure Stormsure (patchless repair): Apply a clear adhesive strip to the back of the hole. Then apply Stormsure to the adhesive strip and within a 10mm radius of the hole. After 10 hours, you can remove the adhesive strip.
Shoe soles: Apply several coats. Sprinkle the final coat with sand to prevent a smooth, shiny surface.
After repairing with Stormsure: Squeeze the contents of the tube forward, roll up the end of the tube and replace the protective cap.
