Stormsure is a true all-rounder: It is suitable for the waterproof repair of
-fabric made of natural and synthetic fibers, -rubber and hypalon, -leather, -nylon, -PVC and PU (polyurethane) and almost all other plastics (including GRP).
It closes holes and cracks reliably and quickly. It creates a higher bond on most materials than the material itself and is therefore particularly suitable for elastic surfaces such as neoprene, rubber, PVC, etc. Due to its consistency, Stormsure not only bonds the damaged parts, but also fills larger holes without any additional patches.
You may have already heard of "The Experiment - Stormsure" . The aim was to put this very special adhesive through its paces. We even cut intact inflatable boats in two and had customers repair them with Stormsure's help. The results are amazing!
Stormsure not only permanently bonded the boats together making them fit for heavy use, but also sealed porous and leaky spots WITHOUT the need for a patch! Special properties - Stormsure hardens through the moisture contained in the ambient air! - Stormsure stays flexible after curing! - Despite its elasticity, Stormsure is resistant to pressure, tension and tearing These properties make Stormsure an almost unique adhesive and therefore an indispensable repair aid for household, workshop, job and all hobbies!
Examples for anglers : - permanently seal defective waders / waders with pure Stormsure without additional patches - permanently seal defective waterproof clothing with pure Stormsure without additional patches - inflatable boats are permanently sealed again, depending on the size of the holes, with pure Stormsure or Stormsure + patches - defective Tents, unhooking mats, bags, rod pods and landing nets are repaired "patchless" (without patches) with pure Stormsure in no time and are thus ready for use again - The properties of Stormsure create completely new possibilities in the end tackle area. Also read: iBlog Update: Experiment Stormsure - THE FINAL Part 1
Due to its sensational success, Stormsure is now available from us in the Imperial Fishing layout at the best conditions!
Stormsure glues almost everything! Stormsure glue is used by professional saddlers and repair companies! The glue hardens on contact with water / humidity - the best glue for us anglers!
In this video you can see various repair options with Stormsure Video length: 2:56 min
"Patchless repair" - Instructions for repairing with Stormsure without additionalPatch Video length: 3:34 min
"Patchless repair" - Instructions for repairing with Stormsure without additional patches Video length: 1:12 min
Use for: repairs, connections, sealing and technical applications!
Adhesive materials: PVC, metals, glass, plastic, PU, composites, nylon, rubber, leather, wood, many fabrics, artificial materials & more - all of them can be combined with each other!
Properties: • High abrasion resistance - ideal for bonding and coating • Mix with 1% water or special thinner for faster curing • Exceptional flexibility even in cold conditions • Can be used with a special thinner (60:40) for coating porous materials. • Resistance to many chemicals
STORMSURE Instructions for use: Note:Check the repaired areas before use. Follow the instructions for use exactly. Application: Clean the damaged area from dirt and dust with soapy water . Then clean the area thoroughly with a chemical cleaning agent (such as acetone, nail polish remover or spirit). Stormsure is applied directly to the damaged area on one side and about 5mm beyond that area. Make sure that the splice is not uneven. Stormsure will dry in 2 to 4 hours, but full drying will take 10 to 12 hours reached. To speed up curing, mix a very small amount of water or adhesive curing agent with Stormsure in a small container. This must be done very thoroughly by stirring intensively (eg with a brush) . Seal holes with pure Stormsure (patchless repair): Attach a transparent adhesive strip to the back of the hole. Then apply Stormsure to the adhesive strip and within 10mm of the hole. After 10 hours you can remove the adhesive strip.
Shoe soles: Apply several coats. Sprinkle the last layer with sand to prevent a smooth, shiny surface.
After repairing with Stormsure:Squeeze the contents of the tube forward, roll up the end of the tube and reattach the protective cap.
Protective gloves are recommended!
Discount - 10% on EVERYTHING in the shopping cart -> 🧺